Wire Seal, Round/Flat Cable, 4-1/0, 14/3-12/3 & 12/2-10/2 AWG, 1/2" NPT
Part # 765002
Wire seals provide low cost cable entries into panels and junction boxes. They are made of Nylon 6/6 flame resistant, self extinguishing Buna-N form More...
WHERE TO BUYOut of Package Length/Depth (in) | 1.1 |
Each in Package Height (in) * | 0.9 |
Each in Package Width (in) * | 1.4 |
Each in Package Length/Depth (in) * | 4 |
Each in Package Weight (oz) * | 0.9 |
RoHS Compliant (Restriction of Hazardous Substances Directive) ° | Contact Compliance |
Wire seals provide low cost cable entries into panels and junction boxes. They are made of Nylon 6/6 flame resistant, self extinguishing Buna-N form seal. Strain relief fittings are resistant to salt water, acids, alkalis, alcohol, oils and are non-corrosive for use in the marine environment. They are good underwater to 300 feet /91.4 m (150 PSIG) provided there is a liquid tight seal between body and housing. Overlapping clamping spines allow for superior pull-out protection and resistance.
- All seals exceed NEMA 4 x or 6 specs
- UL 94 v-0
- Cable range 0.24 - 0.55 inches (6 - 14 mm)
- Thread size 1/2" NPT
- Thread length 0.51 inches
- Clearance hole 0.83 inches